Building Materials

Single component cement-based product in powder form, with selected aggregates, polymers and special corrosion inhibitor additives. Its formula was designed and developed to prevent the formation of rust on reinforcing rods thanks to its waterproof and atmospheric gas-proof qualities and its alkalinity. When mixed with water it becomes a highly adhesive tixotropic mortar easy to apply with a brush, also indicated as an adhesion promoter.

BENFECURE-VARIO-10 and BENFERCURE-VARIO-40 are thixotropic mortars used for renovation of horizontal, vertical and overhead concrete surface profiles in thickness up to 40 mm and for reparation of concrete structures under dynamic load (under roadways, concrete rails). They are suitable for reparation of pillars, of defects like gravel pockets, ramps and industrial floors. Thanks to their properties they allow fast and easy operation because it is not necessary a corrosion inhibitor application to reinforcing steel, there is no need for an additional smoothing mortar and can be finished with a breathable paint after 3 hours only. It possible to mix BENFECURE-VARIO-10 and BENFERCURE-VARIO-40 to get a longer lasting paste.

TRIOTECH-30 is a polymer modified, cement based levelling mortar used to create even substrates for subsequent applications of waterproofing or tiling products. For interior and exterior applications to level and smooth uneven mineral-based wall, ceiling and floor areas that are to be waterproofed or clad with tiles. Also for use beneath waterproofing in swimming pool tanks and exterior areas.

MULTIPLAN-12 is used in thicknesses from 1-12 mm for smoothing, repairing and levelling. Suitable substrates are concrete floors in accordance with DIN 1045, heated and unheated cement-based screeds in accordance with DIN 18560, old, well bonded tile finishes and rapid cement-based screeds (e.g. SOLIDONE PRONTO). Not suitable as a wearing surface without additional finishes. Suitable substrates that have been levelled with MULTIPLAN-12 can be covered with tiles, needle punched carpets, textile finishes, PVC.

MUILTIPLAN-30 is used for smoothening and levelling in layers of 1 – 30 mm thick. Suitable surfaces are floors made of concrete in accordance to German Industrial Standard DIN 1045, heated and unheated cement screeds according to DIN 18560, old hardened tile surfaces and rapid hardening cement screeds (for example SOLIDONE PRONTO). MUILTIPLAN-30 is suitable for exterior areas and areas subject to moisture loads, provided a suitable BENFER compound waterproofing sealant has been applied in advance. Other than the already planned surface, it is not suitable as a wearing surface without additional coating.