Products for Concrete Repairing

BENFERCURE FERRI

Corrosion protector

Single component cement-based product in powder form, with selected aggregates, polymers and special corrosion inhibitor additives. Its formula was designed and developed to prevent the formation of rust on reinforcing rods thanks to its waterproof and atmospheric gas-proof qualities and its alkalinity. When mixed with water it becomes a highly adhesive tixotropic mortar easy to apply with a brush, also indicated as an adhesion promoter.

BENFERCURE-VARIO-40

Rapid setting and rapid hardening mortars for reparation of concrete degraded structures, for protection against corrosion of reinforcing steel, for concrete superficial protection

BENFECURE-VARIO-10 and BENFERCURE-VARIO-40 are thixotropic mortars used for renovation of horizontal, vertical and overhead concrete surface profiles in thickness up to 40 mm and for reparation of concrete structures under dynamic load (under roadways, concrete rails). They are suitable for reparation of pillars, of defects like gravel pockets, ramps and industrial floors. Thanks to their properties they allow fast and easy operation because it is not necessary a corrosion inhibitor application to reinforcing steel, there is no need for an additional smoothing mortar and can be finished with a breathable paint after 3 hours only. It possible to mix BENFECURE-VARIO-10 and BENFERCURE-VARIO-40 to get a longer lasting paste.

Our brands

Wall levelling

Wall Levelling

TRIOTECH-30

Sag resistant compound for walls and floors

TRIOTECH-30 is a polymer modified, cement based levelling mortar used to create even substrates for subsequent applications of waterproofing or tiling products. For interior and exterior applications to level and smooth uneven mineral-based wall, ceiling and floor areas that are to be waterproofed or clad with tiles. Also for use beneath waterproofing in swimming pool tanks and exterior areas.

Our brands

Αρχική » Our Products » Building Materials » Products for building

Mortars

BENFERPLASTER – 07 WHITE

Adhesive/levelling fiber reinforced mortar powder for thermal insulation

BENFERPLASTER-07 WHITE is an adhesive /levelling mortar, fiber-reinforced for exterior insulation and finishing system, whose composition is cement, aggregates with selected grain size with diameter less of 0,7 mm, synthetic resins and special additives. Its formula has been created and developed to paste in a rapid and safe way all the boards used in exterior thermal insulation. The product can also be used for levelling with the use of a fiberglass mesh on insulating panels and concrete surfaces.

Our brands

Αρχική » Our Products » Building Materials » Products for building

Floor Levelling

MULTIPLAN-12

Self levelling smoothing compound up to 12 mm

MULTIPLAN-12 is used in thicknesses from 1-12 mm for smoothing, repairing and levelling. Suitable substrates are concrete floors in accordance with DIN 1045, heated and unheated cement-based screeds in accordance with DIN 18560, old, well bonded tile finishes and rapid cement-based screeds (e.g. SOLIDONE PRONTO). Not suitable as a wearing surface without additional finishes. Suitable substrates that have been levelled with MULTIPLAN-12 can be covered with tiles, needle punched carpets, textile finishes, PVC.

MULTIPLAN-30

Self-levelling underlayment up to 30 mm

MUILTIPLAN-30 is used for smoothening and levelling in layers of 1 – 30 mm thick. Suitable surfaces are floors made of concrete in accordance to German Industrial Standard DIN 1045, heated and unheated cement screeds according to DIN 18560, old hardened tile surfaces and rapid hardening cement screeds (for example SOLIDONE PRONTO). MUILTIPLAN-30 is suitable for exterior areas and areas subject to moisture loads, provided a suitable BENFER compound waterproofing sealant has been applied in advance. Other than the already planned surface, it is not suitable as a wearing surface without additional coating.

Our brands

Αρχική » Our Products » Building Materials » Products for building

Products for wall levelling

Wall levelling

We import and distribute products for wall levelling by MAPEI that are excelently suited for construction methods widely used in Cyprus.

PLANITOP 100

Fast-setting light grey-coloured fine mortar for repairs and finishing of concrete and renders.

PLANITOP 400

Fast setting shrinkage compensated thixotropic mortar for cortical restoration of concrete by applying a single coat of mortar at a variable thickness between 1 and 40 mm.

PLANITOP 560

Lime-cement skimming mortar with an ultra-fine finish for render.

PLANITOP SMOOTH & REPAIR

R2-class, rapid-setting shrinkage-compensated, thixotropic, fibre-reinforced, cementitious mortar applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete.

Low emissions

PLANITOP SMOOTH & REPAIR R4

Structural R4-class, rapidsetting, shrinkage-compensated, thixotropic, fibre-reinforced, cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete.

Low emissions

Our brands

Αρχική » Our Products » Building Materials » Products for building

Products for floor levelling

Floor Levelling

We import and distribute products for floor levelling by MAPEI that are excelently suited for construction methods widely used in Cyprus.

MAPEGROUT SV

Fast-setting and hardening compensated-shrinkage, easy-flow mortar for repairing concrete and for fixing inspection shafts, manholes and highway coating materials.

NIVORAPID

Ultra-fast setting, thixotropic, cementitious levelling compound for horizontal and vertical surfaces, from 1 to 20 mm thick layer.

Low emissions

PLANIGROUT 300

Three-component fluid epoxy mortar for anchorage work.

PLANITOP FAST 330

Quick-setting, fibrereinforced cementitious mortar for internal and external floors and walls, applied at a thickness from 3 to 30 mm to smooth out irregularities.

Low emissions

TOPCEM PRONTO

Ready-to-use, normal setting, quick-drying mortar with high thermal conductivity.

Low emissions

TOPCEM

Special hydraulic binder for normal setting, fast drying (4 days) and controlled shrinkage screeds.

Low emissions

ULTRAPLAN ECO

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 10 mm, with very low emission level of volatile organic compounds (VOC).

Der Blau Engel Low emissions

ULTRAPLAN MAXI

Ultra-fast drying self-levelling compound for thicknesses from 3 to 40 mm.

Low emissions

ULTRAPLAN

Ultra-fast drying self-levelling compound.

Der Blau Engel Low emissions

Our brands

Αρχική » Our Products » Building Materials » Products for building

Products for concrete repairing

We import and distribute products for concrete repairing by MAPEI that are excelently suited for construction methods widely used in Cyprus.

EPOJET

Two-component, super-fluid epoxy resin for injections and anchorings.

MAPEFER

Two-component, anti-corrosion cementitious mortar for protecting steel reinforcement rods.

MAPEFER 1K

One-component corrosion-inhibiting cement mortar for the protection of reinforcing rods.

MAPEGROUT FAST-SET

Fast-setting and drying, shrinkagecompensated, fibre-reinforced mortar for concrete repair.

MAPEGROUT HI-FLOW

Shrinkagecompensated, fibre-reinforced mortar for concrete repair.

MAPEGROUT T40

Medium strength (40 MPa), shrinkagecompensated, fibre-reinforced, thixotropic mortar for repairing concrete.

STABILCEM

Very fluid expanding cementitious binder for the preparation of injection slurries, mortars, and concrete.

Our brands

Αρχική » Our Products » Building Materials » Products for building

Products for anchoring

Anchoring

We import and distribute epoxy anchoring by MAPEI that are excelently suited for construction methods widely used in Cyprus.

EPORIP

Two component solvent-free epoxy adhesive for construction joints and for monolithic sealing of cracks in screeds.

ADESILEX PG1

Two-component thixotropic epoxy adhesives for structural bonding.

MAPEFILL

High-flow non-shrink cementitious anchoring grout.

MAPEFIX VE SF

Chemical styrene-free vinylester anchor for structural loads and construction bars in concrete.

Our brands

Αρχική » Our Products » Building Materials » Products for building

Primers

We import and distribute primers by MAPEI that are excelently suited for construction methods widely used in Cyprus.

ECO PRIM GRIP

Multi-purpose, ready-to-use bonding promoter primer with a very low emission of volatile organic compounds (VOC) for render, smoothing and levelling compounds and adhesives for ceramic tiles.