Adhesives for ceramic tiles and natural stones

Reaction Resins Adhesives

BENFERJOLLY

Epoxy-polyurethane flexible, two part adhesive

A two part white adhesive consisting of epoxy-polyurethane resins, graded particle size aggregates and special additives. It has been formulated and developed for rapid, reliable installation of almost all marble, granite, natural stone, marble agglomerate and tiles in composite marble with polyester resins or cements, including on non-absorbent substrates or substrates subject to slight dimensional variation. A special waterless composition makes this product especially suitable where there is a need to avoid the risk of irreparable staining, not least on porous varieties of marble, and prevent the possible deformation of reconstituted marble tiles. For interior and exterior application.

Our brands

Cementitious Adhesives

BENFER ECOFLEX (EX PRIMOFLEX)

Fiber reinforced flexible adhesive

Benfer ECOFlex is a thixotropic adhesive consisting of high strength cements, graded particle size aggregates, synthetic resins and special additives. It has been formulated and developed for rapid, reliable installation of porcelain tile and ceramic tile on cement based screeds, non-absorbent substrates and onto substrates subject to slight dimensional variation. The high resistance to vertical sliding allows to tile from the top down.

BENFERGRIP C2TE

Special adhesive highly resistant

BENFERGRIP C2TE is a highly tixotropic adhesive in powder consisting of highly resistant cement, selected granulometry quartz, synthetic resins and special new generation additives. Its formula was conceived and developed for rapid and safe installation of all ceramic materials, even from top to bottom

CEMLATEX 600

Synthetic latex for the preparation of mortars based on cement with high adhesive power

CEMLATEX 600 is a polymeric dispersion to be used as an additive for cement-based mortars in order to improve their mechanical resistances, adhesion, elasticity, workability and impermeability. It is to be used as a partial replacement of the mixing water in quantities that may vary depending on the purposes of use and expected results.

Our brands

Αρχική » Our Products » Building Materials » Adhesives for ceramic tiles and natural stones

Water dispersion adhesives

Water Dispersion Adhesives

We carry a top quality range of water dispersion adhesives products by MAPEI that are excelently suited for construction methods widely used in Cyprus. These innovative products for installing ceramic tiles carry the manufacturer’s guarantee when purchased through GEVO.

ADESILEX P22

Ready-to-use adhesive paste with no vertical slip and long open time for ceramic tiles (thickness of adhesive up to 5 mm).

ULTRAMASTIC III

Ready-to-use, high-performance adhesive paste with no vertical slip and long open time, for laying ceramic tiles on walls and floors (thickness of adhesive up to 5 mm). Comes in white color.

Our brands

Αρχική » Our Products » Building Materials » Adhesives for ceramic tiles and natural stones

Reaction resins adhesives

Reaction Resins Adhesives

We carry an extensive range of reaction resins adhesives products by MAPEI that are excelently suited for construction methods widely used in Cyprus. These innovative products for installing stone and ceramic materials carry the manufacturer’s guarantee when purchased through GEVO.

KERALASTIC T

Two-component, high-performance polyurethane adhesive with no vertical slip for ceramic tiles and stone material. Colours: grey and white.

Naval use approved

KERAPOXY ADHESIVE

Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone material. Comes in Wwhite and grey colors.

Our brands

Αρχική » Our Products » Building Materials » Adhesives for ceramic tiles and natural stones

Cementitious Adhesives

We carry an extensive range of cementitious adhesive products that are excelently suited for construction methods widely used in Cyprus. These innovative products for installing stone and ceramic materials carry the manufacturer’s guarantee when purchased through GEVO.

ADESILEX P9

High performance cementitious adhesive with no vertical slip, Low Dust technology and extended open time for ceramic tiles and stone materials. Characterized by excellent workability and suitable for laying large sized stome material and ceramic tiles. No residual greenhouse gas emissions through certified offsetting.

CE 1204 Low emissions

ADESILEX P10

High performance white cementitious adhesive, with no vertical slip and extended open time for glass, ceramic and marble mosaic. Use for interior and exterior floor and wall bonding of installation of normal or heavy weight mesh-backed
or paper-faced glass, ceramic and marble mosaic.

CE 1204 Low emissions

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material (thickness of adhesive up to 10 mm).

GRANIRAPID

Two-component, high-performance, deformable, quick-setting and drying cementitious adhesive for ceramic tiles and stone material (thickness of adhesive up to 10 mm).

Low emissions Naval use approved

ISOLASTIC

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When KERABOND, KERABOND T and KERABOND PLUS are mixed with ISOLASTIC they form a high-performance, highly deformable adhesive with extended open time (C2E/S2).
When ADESILEX P10 is mixed with ISOLASTIC (dilution rate 1:1 with water), it forms a high-performance, highly deformable adhesive with extended open time (C2E/S1).

KERABOND T

Cementitious adhesive with no vertical slip for ceramic tiles (thickness of adhesive up to 5 mm). Colours: grey and white.

KERACRETE

Cementitious adhesive with no vertical slip for ceramic tiles (thickness of adhesive up to 5 mm). Colours: grey and white.

Certification

KERAFLEX EASY S1

Easy-to-apply high-performance deformable cementitious adhesive with extended open time and high wetting capacity for ceramic tiles and stone materials. With very low emission of volatile organic compounds. Particularly recommended for bonding porcelain tiles on large spreads of flooring; applied in layers up to 10 mm thick. Colours: grey and white.

Low emissions

KERAFLEX MAXI S1 ZERØ

High-performance cementitious grey adhesive with no vertical slip, with Low Dust technology, extended open time and deformable with excellent workability. Suitable for laying large-sized ceramic tiles and stone material, with very low emission level of volatile organic compounds and no residual greenhouse gas emissions through certified offsetting.

C2TE S1 certification CE 1204 Low dust

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles (thickness of adhesive up to 5 mm). Colours: grey and white.

Low emissions CE EN

KERASET

Cementitious adhesive for ceramic tiles (thickness of adhesive up to 5 mm). Colours: grey and white.

Low emissions CE EN 1204

KERAQUICK

High-performance, deformable, fast setting cementitious adhesive with no vertical slip, very low emission level of organic volatile compounds, for ceramic tiles and stone material.

Low emissions

Our brands

Αρχική » Our Products » Building Materials » Adhesives for ceramic tiles and natural stones